Placeholder

BOS 4025 Complete Unit Assignments Latest-CSU

$142.00

Quantity:

Product Description

BOS 4025 Complete Unit Assignments Latest-CSU

BOS 4025 Complete Unit Assignments Latest-CSU

BOS4025

BOS 4025 Unit 2 Scholarly Activity Latest-CSU

Unit II Scholarly Activity

For this assignment, choose either Option A or Option B below.

Option A

Conduct an inspection of a workplace for compliance with the means of egress requirements in 29 CFR 1910.36 and 1910.37, and prepare a report of your findings. You can use your current workplace or a local business or industry if you can get permission. Your report should contain the following items:

a brief description of the workplace inspected;

a compliance checklist prepared for the specific workplace and the standards being evaluated; noncompliance observed, including the full OSHA standard citations;

recommended corrective actions; and a summary of overall compliance.

The report should be a minimum of two pages in length (double-spaced), including the checklist. The report must follow APA guidelines for formatting, and the report must include a title page and reference page.

Option B

Many workplaces use portable ladders to conduct work (e.g., painting, repairing) or to access supplies and materials. Locate any ladders used in your workplace, and conduct an inspection of them for compliance with 29 CFR 1910.23 and 1910.26. If you are able to observe any ladders in use, evaluate whether they are being used in accordance with the standards.

Your report should contain the following items:

a brief description of the workplace inspected;

a compliance checklist prepared for the specific workplace and the standards being evaluated; noncompliance observed, including the full OSHA standard citations;

recommended corrective actions; and a summary of overall compliance.

BOS 4025, OSHA Standards 2

The report should be a minimum of two pages in length (double-spaced), including the checklist. The report must follow APA guidelines for formatting, and the report must include a title page and reference page.

Information about accessing the grading rubric for this assignment is provided below.

BOS 4025 Unit 3 Case Study Latest-CSU

Unit III Case Study

OSHA’s personal protective equipment (PPE) standard requires employers to assess the workplace to determine if hazards are present, which may necessitate the use of PPE. Based on the assessment, appropriate PPE must be selected and provided to affected employees.

Using Subpart I Appendix B as a guide, develop a hazard assessment for your workplace or a workplace with which you are familiar. If you work in an office, or if you work in another non-hazardous location, develop an assessment for an imagined industrial shop such as woodworking or metalworking. Use the other sections of Subpart I to help determine the appropriate PPE for each hazard. You can also use online safety equipment catalogs to find examples of PPE that meet the OSHA requirements.

Your submission must be a minimum of two pages in length (double-spaced). Begin your case study with an engaging opening statement that connects the reader to the case study. References and citations in APA format should be provided to support the hazard determinations and PPE selection. The reference page does not count toward meeting the two-page minimum.

Click here to locate the Subpart I Appendix B.

Information about accessing the grading rubric for this assignment is provided below.

BOS 4025 Unit 4 Case Study Latest-CSU

Unit IV Case Study

Consider the scenario below:

Workers need to enter a below-ground, concrete-lined vault to repair a leaking valve that controls the flow of wastewater from several buildings at your plant. The opening for the pit is outdoors and secured with a 36-inch diameter manhole cover. The pit is 12 feet deep, and the walls are 6 feet x 6 feet wide. The valve is at the bottom of the vault. You opened the cover, tested the atmosphere, and found oxygen levels to be at 16%. No toxic substances were detected. After ventilating the space for 15 minutes, the oxygen reading reached 18% and remained at that level.

Address the following items:

Using the flow chart in Appendix A of 29 CFR 1910.146, determine the classification of the space. Explain how you reached the decision.

Based on your determination, develop an OSHA-compliant standard operating procedure (SOP) for workers to follow when entering the space to repair the valve. Include the citation(s) from 29 CFR 1910.146 for each step of the procedure.

Your submission must be a minimum of two pages in length (double-spaced). Be sure to include a title page.

Information about accessing the grading rubric for this assignment is provided below.

BOS 4025 Unit 5 Assessment Latest-CSU

Unit V Assessment

1. Your company is planning to build a new storage and distribution warehouse for furniture products. Forklifts will be required to move material around the warehouse and to load and unload trailers. The purchasing department asked you if they should buy internal combustion engines or electric-powered forklifts. Based on the OSHA standard, discuss the considerations that need to be part of the decision, and provide your recommendation on the type of forklift that should be purchased.

Two hundred word minimum. Originality will be checked.

2. OSHA’s powered industrial truck standard (1910.178) is consistently part of OSHA’s annual list of top 10 standards violated. Discuss some reasons why this is the case. Provide examples that illustrate your point.

Two hundred word minimum. Originality will be checked.

3. In what ways does establishing a safety and health management system in an organization complement and improve compliance with the OSHA standards? Provide examples in your discussion.

Two hundred word minimum. Originality will be checked.

BOS 4025 Unit 6 Case Study Latest-CSU

Unit VI Case Study

The standards in Subpart S are consistently in the top 10 in OSHA’s most frequently cited standards lists and highest penalties assessed lists. The standards in Subpart S are complex and often misunderstood—even by professional electricians.

Use the checklist here to conduct an electrical safety inspection of your workplace. Add the citation for the OSHA standard for each question. In the comments section for each item, include your recommendations for correcting the violations. If a checklist item does not apply to your organization, explain why in the comments. In the summary section at the end of the checklist, discuss the significance of any noncompliance you found, and identify the types of injuries that might result if the violations are left uncorrected.

If you did not find any noncompliance, discuss what your organization does to prevent electrical safety violations and electrical injuries. Compile the checklist information into a report that outlines the major issues, if any, found in your workplace.

The case study should be a minimum of two pages in length (double-spaced), including the completed checklist. The report must follow APA guidelines for formatting, and the report must include a title page and reference page.

Information about accessing the grading rubric for this assignment is provided below.

BOS 4025 Unit 7 PowerPoint Presentation Latest-CSU

Unit VII PowerPoint Presentation

The 2012 revision to the Hazard Communication Standard (HCS) requires that employers train workers on the GHS-compliant hazard warning labels and safety data sheets (see 1910.1200(h)(3)(iv)).

Using Appendices C and D of the current standard as a resource, develop a 10-slide PowerPoint presentation that can be used to train the employees at your workplace or a workplace with which you are familiar. Include examples of the hazardous materials found in your selected workplace in the presentation.

When creating your presentation, be sure your explanations and discussion are in plain language and at a level suitable for BOS 4025, OSHA Standards 3 your target workforce; do not just quote the standard. Additional resources can be found at OSHA’s Hazard Communication page located below.

Please incorporate at least two references into the PowerPoint presentation. The notes may be used to explain the concepts listed on each slide in the PowerPoint presentation.

Occupational Safety & Health Administration. (n.d.). Hazard communication. Retrieved from https://www.osha.gov/dsg/hazcom/index.html

Information about accessing the grading rubric for this assignment is provided below.

BOS 4025 Unit 8 Case Study Latest-CSU

Unit VIII Case Study

There are two parts to this assignment. You must complete both parts. Each part must be a minimum of one page in length, for a total of two pages, not counting the title and reference pages. Please incorporate at least two references into the case study assignment. The assignment should be uploaded as one document, following APA formatting and referencing standards.

Part I: The General Duty Clause

Using the requirements for General Duty Clause violations in Chapter 4 of the OSHA Field Operations Manual (FOM) and any additional information you can find in OSHA compliance directives or standards interpretations, describe a situation involving ergonomics that could be cited as a violation of the General Duty Clause (Section 5(a)(1) of the OSH Act).

Explain how your citation meets the four elements listed in the FOM as necessary to prove such a violation.

Part II: Interpreting OSHA Standards

Search the OSHA standards interpretations and compliance directives for supplemental information on three standards that are important to your workplace or a workplace with which you are familiar. Discuss what you found for each of the standards. Does the information change the way you view these standards or what you might need to do to comply with them in your workplace?

Information about accessing the grading rubric for this assignment is provided below.